Automatic Sliding Doors
Spider Glazing
Door Hardware
Glass Door & Partition Interior Office Entrance/
Room Dividers
Shower & Enclosures
Wash Room Partitions
Movable Wall
Fire Rated Doors

Fire Rated Doors



Providing, supplying and fixing of 55mm thick double/single leaf non metallic asbestos free, fire/smoke check door shutters of 120 minutes fire rating, as per manufacturers specification and similar to the prototype tested by CBRI, Roorkee & certified issue thereof ( as per IS:3614 Part -2, 1992) with overall sizes per site requirement, including door frame of section 140 x 65mm made out of seasoned second class Teak Wood, and shutter comprising of 2 non- combustile boards each 12mm thick sandwiching 25mm thick fire resistant insulation filler faced with 3mm thick commercial ply veneer on both the faces and seasonedteak wood lipping all around the shutter with neat activated intumescent fire seal strip of size 12mm x 4mmon all sides except bottom (for smoke sealing) including making necessary provision for hardware’s fixing as approved by project manager, these provision are to be left during fabricating the doors, all shutters shall be mounted on door frames with the help of 4 Nos stainless steel ball bearing hinges etc. complete



Supply of 46mm thick Steel fire check door of 120 minutes fire rating confirming to BS: 476 Part 22 and IS: 3614 Part II fabricated with 2 nos. 1.2mm thick galvanized sheet with infill of fire rated Acrylic Sealant and non-combustible core bonded to both faces of sheet with lock seam joints at stile edges and internal reinforcement at top, bottom and stile edges for Fire Rating. The doorframes are manufactured from 1.6mm thick galvanized steel sheet pressed from to double rebate profile of size 143mm x 57mm. The door frames and door shutters are finished with H Primer.



  Home | Our Products | Our Projects | Photo Gallery | About Us | Contact Us

All material in this site is Copyright ©2009 IDS Group. All rights reserved.

Tidal Software Solutions